Cementing Hose Hose

Rotary Drilling Hose

Tube: 3/16” thick and black modified nitrile. Specially designed for handling abrasive, corrosive and oil drilling mud

Reinforcement: Multiple layers of textile fabrics and steel cables, with one layer middle rubber placed among cable layers

Cover: Black modified nitrile resistant to abrasion, corrosion, cutting, gouging, oil and weather

Temperature: -20℃ to +82℃ (-4℉ to +180℉)

Application: Flexible connection between standpipe and swivel (Rotary Drilling) or between pump and standpipe (Rotary Vibrator) for pumping mud at extra high pressure in oil drilling and exploration work.

Kelly Hose meets the high demands of directional drilling and down linking with negative pressure pulses and elevated temperatures. This hose can also be used as a motion compensator hose for stabilization of rotary drilling and pumping equipment against vertical wave action on offshore drill platforms. The motion compensator hose is not recommended for phosphate ester fluids.

Cementing Hose Features

Germany Lanxess HNBR as raw material

20% H2S and 80% oil based mud

Survive the extreme oilfield application requirements

Armored with stainless steel 316L

Cementing Hose Couplings

Swaged couplings. Full range of couplings are available, such as hammer union, flange, camlock, male thread, etc.

Cementing Hose Options

Accessories such as safety clamps, hose lift eyes and stainless steel armor are available upon request.

Rotary Drilling Hose Test

Each hose is tested at 15000psi for 15 minutes. Pressure test graph, test certificate and letter of conformance are issued for each hose.

7,500 psi WP – 15,000 psi Tested pressure – 18,750 psi min burst pressure.

Cementing Hose Specification